10
Activating and Deactivating the COPS Client
You must activate the COPS client to implement the COPS module you configure. You can deactivate the COPS client to halt the COPS module implementation.
1.Click COPS under Configuration > Traffic Management in the tree view.
2.Click the Start button in the COPS client field to activate the COPS client; click the Stop button to deactivate the COPS client.
3.Click Apply.
4.Click Save make your change permanent.
When you deactivate the COPS client, you can maintain any existing module and role configuration. This configuration remains available if you reactivate the COPS client.
Changing the Client ID Associated with Specific Diffserv Configuration
You can change a client ID on a running system. Typically, each client ID refers to a specific policy or set of policies.
1.Click COPS under Configuration > Traffic Management in the tree view.
2.Click the Diffserv PIB link in the Configured COPS Module section. This action takes you to the COPS Diffserv specific configuration page.
3.In the Diffserv PIB specific configuration section, click the Client ID
Note
A list of all existing Client IDs appears in the COPS Security configuration section.
4.Click Save to make your change permanent.
Deleting a Client ID
Before you delete a Client ID, make sure that it is not active. Perform the following steps to deactivate a client ID before you delete it.
To disable and delete a Client ID
1.Click COPS under Configuration > Traffic Management in the tree view.
2.Click the Diffserv PIB link in the Configured COPS Module section. The COPS Diffserv specific configuration page appears.
3.To disable the Client ID, click the Client ID
464 | Nokia Network Voyager for IPSO 4.0 Reference Guide |
