![](/images/new-backgrounds/1316947/316947341x1.webp)
To configure automatic transfers of archive files to a remote server
1.Click Backup and Restore under Configuration > System Configuration in the tree view.
2.Under Automatic Transfer of Archive File, select a file transfer protocol, either TFTP or FTP.
If you choose FTP, make sure that your server accepts anonymous FTP logins. You cannot use
Caution
The TFTP option does not work with TFTP servers running on many
3.Enter the IP address of the remote server.
4.If you chose FTP as the transfer protocol, indicate where the core files should be stored on the remote server by entering the appropriate path and directory.
5.Click Apply.
6.Click Save to make your changes permanent.
Transferring Backup Files Manually
To transfer a archive file containing backup files manually to an FTP server using the following procedure.
To manually transfer archive files to a remote server
1.Click Backup and Restore under Configuration > System Configuration in the tree view.
2.Under the Manual Transfer of Archive Files section, enter the following
IP address of the FTP server.
Directory in which to save the backup file.
Enter the name of the user account for connecting to the FTP server.
Enter the name of the password to use when connecting to the FTP server.
You must change the password if you change the FTP server, FTP directory, or FTP user.
Note
The password is not stored in the database. Enter the password each time you want to transfer files to remote server even if you are using the same FTP server.
3.Select the file you want to transfer from either the Manual Backup File or Scheduled Backup File
4.Click Save.
Nokia Network Voyager for IPSO 4.0 Reference Guide | 171 |