8
Table 16 Network Services
Service | Description |
|
|
Daytime | The daytime service sends the current date and time as a character string without regard |
| to the input. |
Time | The time service sends back to the originating source the time, in seconds, since midnight |
| January 1, 1900. This value is sent as a binary number, not a |
|
|
To enable network access options and services
1.Click Network Access and Services under Configuration > Security and Access in the tree view.
2.Select the Yes radio button for the access options and services you want to enable.
3.If you are enabling login to COM2, COM3, or COM4, configure a modem as described in the following procedures.
4.Click Apply.
5.Click Save to make your changes permanent.
Configuring a Modem on COM2, COM3, or COM4
Table 17 describes the modem configuration parameters.
Table 17 Modem Configuration Parameters
Parameter | Description |
|
|
Modem On/Off | Select the appropriate radio button to turn modem on or off. |
Modem Status | Shows whether the system detects a modem on the port and whether it is |
| online. |
| Options: Modem Detected / No Modem Detected |
Inactivity Timeout (minutes) | The length of time, in minutes, that a connected call on the modem can |
| remain inactive (that is, no traffic is sent or received) before the call is |
| disconnected. You can set the value to 0 to disable the timer (that is, the |
| call will never be disconnected due to inactivity). |
Status Poll Interval (minutes) | This value is the length of time, in minutes, between |
| tests. Once every interval, the system tests that the modem is present |
| and online. If the modem is not detected or is offline, a message is logged |
| using syslog. Setting the value to 0 disables the Modem Status monitor. |
Enable Dialback | When set to Yes, an incoming call on the modem is dropped after you log |
| in, and the modem automatically calls the Dialback Number and connects |
| a login process to the line. |
|
|
298 | Nokia Network Voyager for IPSO 4.0 Reference Guide |
