9
8.Enter 10.50.10.2 in the Add remote peer IP address edit box; then click Apply.
9.Configure an inbound route filter for AS 100 according to “BGP Route Inbound Policy Example” on page 446
To configure IBGP on Nokia Platform B
1.Configure the interface as in “Configuring an Ethernet Interface”.
2.Configure an internal routing protocol such as OSPF or configure a static route to connect the platforms in AS100 to each other.
For more information see “Configuring OSPF” on page 356or “To configure a default or static route” on page 395
3.Click BGP under Configuration > Routing Configuration in the tree view.
4.Enter a router ID in the ROUTER ID text box.
The default router ID is the address of the first interface. An address on a loopback interface that is not the loopback address (127.0.0.1) is preferred.
5.Enter 100 in the AS number edit box.
6.Enter 100 in the Peer autonomous system number text box.
7.Enter 10.50.10.1 in the Add remote peer IP address text box; then click Apply.
8.Enter 170.20.1.1 in the Add remote peer IP address text box; then click Apply.
9.Configure an inbound route filter for AS100 according to “BGP Route Inbound Policy Example.”
To configure IBGP on Nokia Platform C
1.Configure the interface as in “Configuring an Ethernet Interface”.
2.Configure an internal routing protocol such as OSPF or configure a static route to connect the platforms in AS100 to each other. For more information, see “Configuring OSPF” on page 356 or “To configure a default or static route.”
3.Click BGP under Configuration > Routing Configuration in the tree view.
4.Enter a router ID in the ROUTER ID edit box.
The default router ID is the address of the first interface. An address on a loopback interface that is not the loopback address (127.0.0.1) is preferred.
5.Enter 100 in the AS number text box.
6.Enter 100 in the Peer autonomous system number text box.
7.Click Internal in the Peer group type
8.Enter 170.20.1.2 in the Add remote peer IP address text box; then click Apply.
9.Configure an inbound route policy for AS100 according in “BGP Route Inbound Policy Example.”
To configure Nokia Platform C as an IBGP peer to Nokia Platform A
10.Click BGP under Configuration > Routing Configuration in the tree view.
416 | Nokia Network Voyager for IPSO 4.0 Reference Guide |
