Nokia IPSO 4.0 manual 250, Source Function

6

MIB	Source	Function
Rate-Shape MIB	proprietary	Monitoring rate-shaping statistics and configuration.
		Monitoring system-specific parameters.
IPSO System MIB	proprietary	Defines the system MIB for IPSO. The IPSO chassis
		temperature, fan group, and power-supply group function
		only on certain firewalls.
IPSO Registration MIB	proprietary	Defines the object ID (OID) prefixes.
OID Registration MIB	proprietary	Defines the object ID (OID) prefixes.
Unit Types MIB	proprietary	Contains OID values for the different types of circuit cards
		used in Nokia equipment.
TCP MIB	RFC 2012	Provides management information of TCP implementations.
EtherLike MIB	RFC 1650	Generic objects for Ethernet-like network interfaces.
Host Resources MIB	RFC 1514	Provides information about the system, such as hardware,
		software, processes, CPU utilization, disk utilization and so
		on.
IANAifType MIB	IANA	Defines the IANAifType textual convention, including the
		values of the ifType object defined in the MIB-II ifTable.
IF MIB	RFC 2233	Describes generic objects for network interface sublayers
IP MIB	RFC 2011 Provides management information for IP and ICMP
		implementations.
IP Forwarding MIB	RFC 2096	Displays CIDR multipath IP routes.
ISDN MIB	RFC 2127	Describes the management of ISDN interfaces.
		Note: The isdnMibCallInformation trap is not supported by
		IPSO.
VRRP MIB	RFC 2787	Provides dynamic failover statistics.
RIP MIB	RFC 1724	Describes RIP version 2 protocol.
SNMP Framework MIB	RFC 2571	Outlines SNMP management architecture.
SNMP MPD MIB	RFC 2572	Provides message processing and dispatching.
SNMP User-based SM MIB	RFC 2574	Provides management information definitions for SNMP
		User-based Security Model
SNMPv2 MIB	RFC 1907	Defines SNMPv2 entities.
		Note: The warmStart trap is not supported.
SNMPv2 SMI	RFC 2578

250 Nokia Network Voyager for IPSO 4.0 Reference Guide