2
IPoA Example
This section describes how you might configure the interfaces of your IP security platform in an example network, using Network Voyager.
The following figure shows the network configuration for this example.
Nokia Platform A
PVC 42 to Nokia Platform B
PVC 53 to Nokia Platform C
ATM
Switch
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
Nokia Platform B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Nokia Platform C |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 00125 | |||||||||
A company has five Ethernet networks in three separate locations. The networks are connected to each other with three routers that belong to the same logical IP subnet over ATM. This example configures the ATM interface on Nokia Platform A. The interface is connected to Nokia Platform B through ATM PVC 42 and to Nokia Platform C through ATM PNC 53. Nokia Platform B and Nokia Platform C are connected to each other through an ATM PVC; their ATM interfaces have already configured.
To configure the ATM interface on Nokia Platform A
1.Click Interfaces under Configuration > Interface Configuration in the tree view.
2.Click the physical interface link to configure in the Physical column. Example:
3.Create a logical interface in the Create a new LLC/SNokia Platform RFC1483 interface section by selecting LIS in the Type list box.
4.Enter 42,53 in the VCI(s) text box.
5.Click Apply.
6.Click the newly created interface
7.Enter 10.0.0.1 in the IP Address text box.
8.Enter 24 in the Mask Length text box.
82 | Nokia Network Voyager for IPSO 4.0 Reference Guide |
