If you specify an invalid FTP server or an invalid path to a valid server as the source of the image, Cluster Voyager does not respond with an error message and displays the following messages instead:
New Image installation in progress
Please don't perform a cluster reboot until all nodes have finished the upgrade.
If IPSO does not also display additional messages indicating that the download is proceeding (there might be a short delay), the FTP information might be incorrect. Correct the FTP information if required and begin the download again.
3.After the new image has been successfully installed on all the nodes, you need to reboot the nodes so that they will run the new image. When the system prompts you to reboot the cluster, click Manage IPSO images (including REBOOT).
4.On the IPSO Cluster Image Management page, click the Reboot button at the bottom of the page.
Note
Clicking this button allows you to perform a cluster safe reboot, which ensures that no traffic is dropped while the cluster reboots (see “Rebooting a Cluster”). If you manually reboot each node by clicking the Reboot buttons associated with the individual nodes, there might be a period in which all the nodes are out of service.
5.On the Cluster Safe Reboot page, click Apply.
The upgraded nodes retain any cluster configuration information that was created with the previous version of IPSO.
Rebooting a Cluster
When you click Reboot, Shut Down System on the main configuration page in Cluster Voyager, you see the Cluster Reboot, Shut Down System page. At the bottom of this page is the Cluster Traffic Safe Reboot link. If you click this link and then click Apply, the cluster nodes are rebooted in a staggered manner. The process is managed so that only one node is out of service at a time. For example, if you reboot a
The originating node reboots each of the other nodes in order. It waits until each node has successfully rebooted and rejoined the cluster before rebooting the next node. Once all the other nodes have rebooted and rejoined, the originating node reboots itself.
Note
The originating node is the node that you are logged into. It might not be the cluster master.
Nokia Network Voyager for IPSO 4.0 Reference Guide | 237 |
