Nokia IPSO 4.0 manual Configuring Basic Nokia Network Voyager Options

Configuring Basic Nokia Network Voyager Options

You can configure the following options for Nokia Network Voyager access:

„Allow Network Voyager access (enabled by default)

„Enable session management (enabled by default)

„Specify a Network Voyager SSL/TLS port number

„Require encryption

Note

Changes to some of these settings might make Network Voyager unusable. You can use the CLI set voyager commands to regain access.

To configure Web access for Nokia Network Voyager

1.Click Voyager Options under Configuration > Security and Access > Voyager in the tree view.

2.Select Yes for the Allow Voyager Web Access field. This option is selected by default.

Caution

If you uncheck the check box, you must use the CLI to access your IP security platform.

3.To enable cookie-based session management, select Yes for the Enable Session Management field.

4.Enter the time interval for which a Network Voyager user is allowed to be logged in without activity in the Session Timeout in Minutes text box.

The default value is 20 minutes. If the user closes the browser without logging out, the exclusive configuration lock remains in effect until the session time-out interval expires.

5.Enter the number of the port to use for SSL/TLS-secure connections in the port number text box.

The default is port 443.

Using the default port allows users to connect to Network Voyager without specifying a port number in the URL. If you change the port number, users must specify a port number in the URL: for example, https://hostname:<portnumber>/.

6.Select the appropriate encryption level for your security needs from the Require Encryption drop-down list; for example, 40-bit key or stronger.

Note

The encryption level you enter is the minimum level of encryption you require. You might obtain stronger encryption by default if your Web browser supports it.

7.Click Submit.

Nokia Network Voyager for IPSO 4.0 Reference Guide 301