Presence of a
Ability to specify the default recipient on the mail hub
IPSO does not support the following mail relay features:
Support for incoming email
Support for mail transfer protocols other than outbound SMTP.
Ability to telnet to port 25
Support for email accounts other than admin or monitor
System Failure Notification
This procedure describes how to set your system to send email to one or more people when a system failure occurs. Separate multiple email addresses by spaces.
To configure failure notification
1.Click System Failure Notification under Configuration > System Configuration in the tree view.
2.Click On next to Enable Failure Notification.
3.Click Apply.
4.Enter the email address of the people you want to notify in the event of a system failure, and then click Apply.
Examples of a system failure include crashing daemons (snmpd, ipsrd, ifm, xpand) and a system reboot that results from a fatal error.
In a system failure notification, the following information appears:
System information
Image information
Crash information
Crash trace
5.To make your changes permanent, click Save.
Configuring Mail Relay
To configure mail relay for your firewall
1.Click Mail Relay under Configuration > System Configuration in the tree view.
2.Enter either the IP address or hostname of the email server that relays outgoing email in the Mail Server text box.
3.Enter the username on the mail server to which mail addressed to admin or monitor is sent in the Remote User text box; then click Apply.
4.Click Save to make your changes permanent.
Nokia Network Voyager for IPSO 4.0 Reference Guide | 157 |
