Nokia IPSO 4.0 Viewing Routing Protocol Information, Displaying the Kernel Forwarding Table, 486

12

„Time Since Join—Time since node joined the cluster.

„Work Assigned (%)—Percentage of work load assigned to this node.

Note

If your cluster is not initialized, the Cluster Monitor page contains a link to the Cluster Configuration page, which enables you to configure cluster parameters for this node.

Viewing Routing Protocol Information

To view statistical information for routing protocols, click the appropriate link under Monitor > Routing Protocols. You can select from the following links:

„OSPF Monitor

„BGP Monitor

„RIP Monitor

„IGRP Monitor

„VRRP Monitor

„PIM Monitor

„DVMRP Monitor

„IGMP Monitor

To monitor routing protocol information for IPv6, you can select from the following links under Monitor > IPv6 Monitor:

„OSPFv3 Monitor

„RIPng Monitor

„IPv6 VRRP Monitor

„IPv6 Router Discovery Monitor

„IPv6 Route Monitor

„IPv6 Forwarding Table

Displaying the Kernel Forwarding Table

To view the IP forwarding table that the kernel is using to make its forwarding decisions, click Forwarding Table under Monitor > Routing Protocols in the tree view.

For IPv6, click IPv6 Forwarding Table under Monitor > IPv6 Monitor.

Displaying Route Settings

To view the route settings for your system, click Route under Monitor > Routing Protocols in the tree view.

486 Nokia Network Voyager for IPSO 4.0 Reference Guide