of the processing cycle. The temperature display will show the actual cavity temperature until the temperature reaches the setpoint, then it will display the programmed temperature.
Displaying Time/Temperature During a Processing Cycle
If you press during a processing cycle, the probe icon under the temperature display will light and the probe temperature will be displayed for 5 to 8 seconds. You may press it again if you like.
Press to display both Cook temperature and time programmed for the Menu Button you're using. Press to display both Grill temperature and time programmed for the Menu Button you're using.
Press to display programmed temperature only.
Press to display programmed time only.
Interrupting a Processing Cycle
If you want to check the food before the end of the processing cycle, press | . This will turn off | ||
the heaters, the front lamp and the rotor. | will flash. |
| |
|
| START |
|
|
| STOP |
|
Press | again to start the cycle from where it left off. |
| |
Press | to start all over at the beginning of the programmed cycle. |
| |
| START |
|
|
STOP
End of Processing Cycle
At the end of a Cook or Grill cycle, a buzzer will sound. Press to silence the buzzer.
When the oven goes into the Warm/Hold cycle, the buzzer will sound, and the front lamp will cycle
on and off with the heaters. Press to silence the buzzer. The temperature and time displays will show actual oven cavity temperature and time of day until reaching the holding temperature.
Press START to end the holding process.
STOP
Changing a Programmed Setting
You may modify the temperature or time of a Cook or Grill function only on any Menu Button prior
to starting processing, or during processing. Press (for temperature) or (for time) while
at the same time pressing or . This will not change the temperature or time programmed in the memory for that Menu Button.
Turning the Buzzer Off
Press .
Setting the End Time (Delayed Start)
Assume the roasting time is one hour and fifteen minutes and it is currently 2 o'clock. If you want to finish roasting at 4:00, program as follows:
Press and hold while pressing or to adjust the time to 4:00. The colon in the display will flash. The time display will show the cooking time.
Press STARTSTOP . Cooking will begin at 2:45. Colon starts flashing.
Roasting stops at 4:00; buzzer sounds. Press | to silence. |
– 11 –