Hobart HRO550P manual AUTOMATIC CONTROLS Fig, Setting the Temperature, Setting the Roasting Time

AUTOMATIC CONTROLS (Fig. 4)

Fig. 4

Automatic Controls can regulate the roasting temperature, stop cooking at a preset time, or allow the buzzer to be timed. The last entered Temperature and Roasting Time is always retained in memory by the Automatic Controls. Set the Temperature and Roasting Time, then press ON to begin.

• Setting the Temperature
		DISPLAY TEMP
Press		325	— Displays the thermostat setting (150 - 450°F).
Press	+	326	—	Increases the temperature setting.
Press	+	324	—	Decreases the temperature setting.

•	Setting the Roasting Time
			DISPLAY TIME
	Press		1:15	—	Displays the automatic roasting time.
	Press	+	1:16	—	Increases the automatic roasting time.
	Press	+	1:14	—	Decreases the automatic roasting time.
•	Press ON to begin.
Setting an Early Warning Buzzer

Assume the roasting time is one hour and fifteen minutes and it is currently 2 o’clock. The cycle completes and the buzzer will sound at 3:15. If you want an early warning buzzer for basting or whatever reason, program as follows:

		DISPLAY TIME
Press		3:15	—	Displays the sum of the current time plus the roasting time.
Press	+	3:00	—	Buzzer will sound at 3:00.
Press ON.			—	Roasting begins.
• At 3:00, the interim buzzer sounds. Press					to silence.
• At 3:15, roasting stops and buzzer sounds again. Press						to silence.

Setting the End Time (Delayed Start)

Assume the roasting time is one hour and fifteen minutes and it is currently 2 o’clock. If you want to finish roasting at 4:00, program the Automatic Control as follows:

		DISPLAY TIME
Press		3:15	—	Displays the sum of the current time plus the roasting time.
Press	+	4:00	—	Roasting will stop at 4:00.
Press ON.			—	The red light on the ON button is lit. Rotisserie stays off until:
• Roasting begins at 2:45. Colon starts flashing.
• Roasting stops at 4:00; buzzer sounds. Press					to silence.

– 7 –