2
Example:
3.In the Switch Type
4.In the Line Topology field in the Physical Configuration table, click
5.Click Automatic or Manual in the TEI Option
Generally, automatic TEIs are used with multipoint connections, while fixed TEIs are used in
6.Click Apply.
7.(Optional) If you selected Manual as the TEI option, enter the TEI assigned to the ISDN interface in the TEI field.
8.In the Physical Configuration table, click
The
9.Click Apply.
10.Click Save to make your changes permanent.
To configure an ISDN logical interface to place calls
1.Click Interfaces under Configuration > Interface Configuration in the tree view.
2.In the Physical column, click on the ISDN
3.In using the Encapsulation text box in the Create new Logical Interface table, select whether to run PPP or multilink PPP on the interface.
4.Click Apply.
A newly created logical interface appears in the Interface column of the Logical Interfaces table.
5.Click the logical interface name in the Interface column of the Logical Interfaces table to go to the Interface page.
6.If the interface should be unnumbered, perform steps a and b. If the interface should be numbered, skip to step 7.
In unnumbered mode the interface does not have its own unique IP
a.Click Yes next to Unnumbered interface.
b.Click Apply.
52 | Nokia Network Voyager for IPSO 4.0 Reference Guide |
