Nokia IPSO 4.0 manual Location, Stats, 202

4

„Master—Forwarding IP packets addressed to the virtual router.

„Backup—Eligible to become master and monitoring the state of the current master.

„Initialize—Inactive; waiting for startup event.

Note

If a virtual router is in initialize state for longer than 20 seconds, this typically indicates that you have a configuration problem, such as a virtual IP address that is not valid. Check your VRRP configuration.

Location

The location section of the VRRP service status table displays the virtual router flags or the primary address of the current virtual router master.

The location options are:

„Local—The virtual router applies to addresses owned by the local router.

„IP address—Primary address of the current virtual router master. Address 0.0.0.0 indicates unknown.

Stats

The stats section of the VRRP service status table displays VRRP send and receive packet statistics.

The Stats options are:

„Advertisement Transmitted—Number of VRRP Advertisement packets sent.

„Advertisement Received—Number of VRRP Advertisement packets received.

„Bad Address List Received—Number of VRRP packets received and discarded due to misconfigured address list.

Note

If the advertisement is from the address owner (priority=255) that packet is accepted, even with the configuration mismatch.

„Bad Advertise Interval Received—Number of VRRP packets received and discarded due to misconfigured advertisement interval.

„Authentication Mismatch—Number of VRRP packets received and discarded due to misconfigured authentication type.

„Authentication Failure—Number of VRRP packets received and discarded due to authentication failure.

202 Nokia Network Voyager for IPSO 4.0 Reference Guide