Getting Started
6
• Turn off the radio (see page 13) or place the NiMH battery in the charger adapter cover.
•Plug in the charger.
•At the contacts on the back of the radio, or if charging just the battery, at the battery contacts:
•Position the charger with the hook on the LED end of the charger placed over the larger slot.
•Snap the hook on the cord end into the smaller slot.
Note: If you notice the LED flashing red for more than a minute while clamping the charger onto the charger adapter cover, the battery is faulty and must be replaced.
•When the LED turns solid green, the battery is fully charged.
Note: When charging the battery by itself, remove the charger from the charger adapter cover before removing the battery.
