Motorola T7400, T7450 Settings, Radio’s, Your, Push to Talk Timeout Timer, Setting the Call Tone

	You can set a different code for each channel using this procedure. An extended
	press of	of	allow you to scroll through the Interference Eliminator Codes
Settings	rapidly so you can quickly reach the code you want.
	Note: You must set the Interference Eliminator Code to on a radio that uses
	Interference Eliminator Codes to communicate with radios that do not have
	Interference Eliminator Codes.
	Push to Talk Timeout Timer
	To prevent accidental transmissions and save battery life, the radio emits a
Radio’s
	continuous warning tone and stops transmitting if you press					for 60 continuous
	seconds.
	Setting the Call Tone
	Your radio can transmit different individual call tones to other
your
	radios in your group so you can alert the group that you want
	to talk to them. There are ten distinct individual call tones to
	choose from and you can also turn Call Tones Off by selecting
Changing
	Call Tone	. Once selected, press		to transmit the Call Tone
	to others.
	To set your Call Tone:
	• Turn radio On.
	• Press	3 times as needed to display:			.
	• You can press and hold or			to scroll through the available call tones. The

radio plays a sample of each individual Call tone as you scroll through them.

22 • The default is set on ,or you may choose .