![](/images/new-backgrounds/1140374/14037443x1.webp)
Note: Your radio will only communicate with radios set to the same Channel and Interference Eliminator Code.
Changing your Radio’s Settings
Setting the Channel
• Turn radio On.
• To set, press once the Channel display begins to flash.
•Then press or
to choose the Channel.
•Press to exit this menu.
Note: The red indicator light above the display flashes every second when the Channel is in use.
Setting the Interference Eliminator Code
Interference Eliminator Codes help minimize interference by providing a choice of code combinations. Your radio has 99 Interference Eliminator Codes. Codes
To set the code for a channel:
1.Press until the code starts to flash.
2.Press or
to select the code.
3.Press to save the code setting.
Changing your Radio’s Settings
21