Motorola V80 manual Adjusting Headset Volume, Pairing to Additional Devices

UG.V80.GSM.book Page 34 Wednesday, April 7, 2004 12:20 PM

Action

3Select the Motorola HS820 from the discovered devices list and confirm following the on screen prompts.

4When prompted by the phone, enter the passkey 0000 and confirm to pair the headset with the phone.

The device ID is now stored in the phone’s memory.

Pairing is successful when the headset indicator flashes rapidly.

Pairing to Additional Devices

Your headset can store pairing information for up to eight different devices with Bluetooth wireless technology. Devices are stored in a “Paired Device List” in memory in the order entered. When an attempt to pair to more than eight devices is made, the oldest paired device is removed from the list.

Any of the eight paired devices can initiate a connection to the headset.

The headset will only automatically initiate a connection (upon power-up) with the last device it was connected to. If you want to connect the headset to another device in the paired device list, you must initiate the connection from that device. Whichever of the eight devices initiates a connection to the headset afterwards, that device then becomes the “last connected” device.

Adjusting Headset Volume

Increasing or Decreasing Volume

To increase speaker volume, press the top volume button repeatedly until you reach the desired volume level.

To decrease speaker volume, press the bottom volume button repeatedly until you reach the desired volume level.

34 - Bluetooth