Motorola W490 Battery charging, To replace, Door against, Phone and then slide it into place

3	To replace the
	battery door, set the
	door against the

phone and then slide it into place.

battery charging

New batteries are not fully

charged. Plug the battery

charger into your phone and an electrical outlet. Your phone might

take several seconds to start charging the battery. When finished, your display shows Charge Complete.

Tip: Relax, you can’t overcharge your battery. It will perform best after you fully charge and discharge it a few times.

You can charge your battery by connecting a cable from your

phone's mini-USB port to a USB port on a computer. Both your

phone and the computer must be turned on, and your computer must have the correct software drivers installed. Cables and software drivers are available in

Motorola Original data kits, sold separately.

If your battery is completely dead and you plug in a cable to charge it, your keypad and display might not light up. Your battery will still charge.

essentials 11