Motorola W510 manual Turn it on & off, Battery charging

battery charging

New batteries are not fully charged.

Plug the battery charger into your

phone and an electrical outlet. Your phone might take several seconds to start

charging the battery. When finished, your display shows Charge Complete.

You can charge your battery by connecting a cable from your phone's

mini-USB port to a USB port on a computer. Both your phone and the

computer must be turned on, and your computer must have the correct software drivers installed. Cables and software drivers are available in Motorola Original data kits, sold separately.

If your battery is completely dead and you plug in a cable to charge it, your keypad and display might not light up. Your battery will still charge.

Tip: Motorola batteries have circuitry that protects the battery from damage from overcharging.

turn it on & off

Caution: Some phones ask for your SIM card PIN code when you turn them on. If you enter an incorrect PIN code three times before the correct code, your SIM card is disabled, and your display shows SIM Blocked. Contact your service provider.

To turn on your phone, press and hold Ofor a few seconds or until the keypad or display lights up.

If prompted, enter your eight-digit

SIM card PIN code and/or

Use and Care 13