Motorola XPR 4580 - page 24

Receiving and Making Calls

English

14

Making a Call with the Channel Rocker

NOTE: This is a trunking only feature.

Making a Group Call

To make a call to a group of users, your radio must be

configured as part of that group.

Procedure:

1Press the Channel Rocker to select the channel with the

targeted talkgroup.

2Press the PTT button to make the call. The green LED lights

up.

3Wait for the Talk Permit Tone to finish (if enabled) and speak

clearly into the microphone.

4Release the PTT button to listen.

Making a Private Call

Procedure:

Press the programmed Quick Access (One-Touch) Private

Call button to dial the programmed ID (number) and proceed to

Step 4.

OR

1Press the Call button to call.

2The display shows the call list, you can scroll through and

select the required ID (any target ID or last transmitted or

received ID) or go to the manual dial option to enter the

required ID.

3Press the PTT button to start the Private Call. The green

LED lights up.

4The first line of the display shows Calling. The second line

displays the target alias or ID and the Private Call icon.

5When you are connected, the first line of the display shows

the ID or alias of the target radio and the Private Call icon.

The second line displays Private Call. Press and hold the

PTT button to talk. Release the PTT button to listen.

OR

If no acknowledgment is received, the display shows No

Answer.







NAG_LACR.book Page 14 Thursday, November 12, 2009 10:17 AM

Contents

Main Page i DECLARATION OF CONFORMITY ii iii iv v Page Important Safety Information ! vii Important Safety Information Product Safety and RF Exposure Compliance ATTENTION! viii Computer Software Copyrights How to Use This User Guide What Your Dealer/System Administrator Can Tell You Powering Up the Radio Adjusting the Volume Radio Controls You Will Be Using Programmable Buttons Assignable Radio Functions Accessing the Programmed Functions Push-To-Talk (PTT) Button Switching Between Conventional and Trunking Mode Display Icons Call Icons Main Menu Icons In-Menu Icons LED Indicators Audio Tones CH - Indicator Tones P1 OK P2 Selecting a Zone 2Por Q to Zone and press N to select. 3 4Por Q to the required zone and press N to select. 5 Selecting a Radio Channel Receiving and Responding to a Radio Call CH - Receiving and Responding to a Group Call 1 2 Page Making a Radio Call Page Making an Enhanced Private Call 1 2 3 4 1 5 6 Page Using the Dynamic Regrouping Feature 1 2 Talkaround Permanent Monitor Scan Lists Viewing an Entry in the Scan List 2Por Q to Scan and press N to select. 3Por Q to View/Edit List and press N to select. 4 Editing the Scan List Adding a New Entry to the Scan List Page Scan Page Contacts Settings Call Indicator Settings Call Log Features Call Alert Operation Page Emergency Operation Page Page Page Page Trunking System Controls Using the Failsoft System 1 2 Going Out of Range Page Utilities Page Page Page Page Page Using the Keypad Additional Advanced Features Dual-Tone Multi Frequency (DTMF) Antennas Audio Cables Mounting Kits Speakers Miscellaneous Accessories MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: II. GENERAL PROVISIONS: III. STATE LAW RIGHTS: IV. HOW TO GET WARRANTY SERVICE: V. WHAT THIS WARRANTY DOES NOT COVER: VI. PATENT AND SOFTWARE PROVISIONS: VII. GOVERNING LAW: