Motorola XPR 4580 Utilities

Advanced Features

English

34

Changing the Current Site

Procedure:

1Press the programmed Site Search button (it could be short

press or long press based on the configuration of the

programmable button).

2A tone sounds and the display momentarily shows Scanning

site.

3When the radio finds a new site, it returns to the Home

screen.

Utilities

Setting the Squelch Level

NOTE: This is a conventional only feature.

You can adjust your radio's squelch level to filter out unwanted

calls with low signal strength or channels that have a higher

than normal background noise.

Settings: Normal is the default. Tight filters out (unwanted)

calls and/or background noise. However, calls from remote

locations may also be filtered out.

Procedure:

Press the programmed Squelch button to toggle squelch level

between normal and tight.

OR

Follow the procedure below.

1S to access the menu.

2Por Q to Utilities and press N to select.

3Por Q to Radio Settings and press N to select.

4Por Q to Squelch and press N to select.

5Choose either Tight or Normal and press N to select.

6Screen returns to the previous menu.

Setting the Power Level

You can customize your radio’s power setting to high or low for

each channel.

Settings: High enables communication with radios located at a

considerable distance from you. Low enables communication

with radios in closer proximity.







NAG_LACR.book Page 34 Thursday, November 12, 2009 10:17 AM

Contents

Main Page i DECLARATION OF CONFORMITY ii iii iv v Page Important Safety Information ! vii Important Safety Information Product Safety and RF Exposure Compliance ATTENTION! viii Computer Software Copyrights How to Use This User Guide What Your Dealer/System Administrator Can Tell You Powering Up the Radio Adjusting the Volume Radio Controls You Will Be Using Programmable Buttons Assignable Radio Functions Accessing the Programmed Functions Push-To-Talk (PTT) Button Switching Between Conventional and Trunking Mode Display Icons Call Icons Main Menu Icons In-Menu Icons LED Indicators Audio Tones CH - Indicator Tones P1 OK P2 Selecting a Zone 2Por Q to Zone and press N to select. 3 4Por Q to the required zone and press N to select. 5 Selecting a Radio Channel Receiving and Responding to a Radio Call CH - Receiving and Responding to a Group Call 1 2 Page Making a Radio Call Page Making an Enhanced Private Call 1 2 3 4 1 5 6 Page Using the Dynamic Regrouping Feature 1 2 Talkaround Permanent Monitor Scan Lists Viewing an Entry in the Scan List 2Por Q to Scan and press N to select. 3Por Q to View/Edit List and press N to select. 4 Editing the Scan List Adding a New Entry to the Scan List Page Scan Page Contacts Settings Call Indicator Settings Call Log Features Call Alert Operation Page Emergency Operation Page Page Page Page Trunking System Controls Using the Failsoft System 1 2 Going Out of Range Page Utilities Page Page Page Page Page Using the Keypad Additional Advanced Features Dual-Tone Multi Frequency (DTMF) Antennas Audio Cables Mounting Kits Speakers Miscellaneous Accessories MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: II. GENERAL PROVISIONS: III. STATE LAW RIGHTS: IV. HOW TO GET WARRANTY SERVICE: V. WHAT THIS WARRANTY DOES NOT COVER: VI. PATENT AND SOFTWARE PROVISIONS: VII. GOVERNING LAW: