Motorola XTSTM 1500 manual Universal Connector Cover, Remove the Connector Cover

Models: XTSTM 1500

1 66
Download 66 pages 45.25 Kb
Page 22
Image 22
Universal Connector Cover

General Radio Operation

Universal Connector Cover

The universal connector cover is located on the antenna side of the radio. It is used to connect certain accessories to the radio.

Note: To prevent damage to the connector, shield it with the connector cover when not in use.

Remove the Connector Cover

1 Insert a flat-bladed screwdriver into the area between the bottom of the cover and the slot below the connector.

2Hold the top of the cover with

your thumb while you pry the bottom of the cover away from the radio with the screwdriver.

Attach the Connector Cover

1Insert the hooked end of the cover into the top of the connector. Press downward on the cover’s top to seat it into the slot.

2Press the cover’s lower tab below the connector until it snaps in place.

Top Hooked End Slot

Tab

Bottom

Slot

12

Page 22
Image 22
Motorola XTSTM 1500 manual Universal Connector Cover, Remove the Connector Cover, Attach the Connector Cover