Software Installation
1.Open [Control Panel], click on the [Network] icon, and select the [Adapters] tab.
2.Click on MOXA Smartio/Industio Family Adapter from the Network Adapter list.
3.Click the [Remove] button in the Network dialog box.
4.Click the [Close] button in the Network dialog box.
5.Restart the system.
6.Refer to the instructions given in the “First Time Driver Installation” section to install the new driver.
Removing the Driver
To remove the Smartio
1.Open the [Control Panel], click on the [Network] icon, and select the [Adapters] tab.
2.Click on MOXA Smartio/Industio Family Adapter from the Network Adapters list.
3.Click the [Remove] button in the Network dialog box.
4.Click the [Close] button to exit the Network dialog box.
5.Restart the system to activate the new configuration.
Windows 95/98
The Windows 95/98 driver supports up to 128 serial ports, from COM1 to COM128. To fully utilize the advanced
Smartio