PCI Express Board User’s Manual

Serial Programming Tools

SCO

MOXA provides drivers that allow you to use the following serial board products under SCO Unix.

yPCI Express Boards: CP-118EL,CP-168EL, CP-104EL.

yUniversal PCI Boards: CP-118U, CP-168U, CP-104UL, CP-104JU, CP-102U, CP-102UL

yPCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI

yISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS

Follow the steps given in this section to install the SCO driver. Note that the SCO driver provided by MOXA only supports RS-232. Consequently, the SCO driver will only work with CP-118U ports that are configured for RS-232. MOXA provides drivers for the following versions of SCO:

ySCO OpenServerySCO UnixWare 7

ySCO UnixWare 2.1

The following steps are for installing the driver under SCO OpenServer. The installation procedures for SCO UnixWare 7 and SCO UnixWare 2.1 are similar.

1.Copy the driver file .tar to your host.

2.#tar xvf <driver tar file> /tmp/moxa/mxintall /tmp/moxa/sco.tar

3.# cd/tmp/mxinstall

# ./mxinstall

4.The window shown below will open next. Press any key to continue.

Copyright© 2006 MOXA Technologies Co., Ltd.

All Rights Reserved.

MOXA Smartio Family Device Driver Installation (Ver. 1.8)

For SCO UNIX System V/386 Release 3.2

Tar files, please wait…..O.K.

Press any key to continue

3-37