Moxa Technologies CSM 200 manual Communication Connections, 10/100BaseTX Ethernet Port Connection

CSM-200-1214/CSM-200-1218

PWR

Fiber

Link

TX

RX

10M

100M

86.8 mm

(3.42 in)

117.1 mm (4.61 in)

124.3 mm (4.89 in)

21 mm

(0.83 in)

ATTENTION Electrostatic Discharge Warning!

To protect the product from damage due to electrostatic discharge, we recommend wearing a grounding device when handling your CSM-200 slide-in modules.

Communication Connections

The CSM-200 Series has one 10/100BaseT(X) Ethernet port, and one 100BaseFX (SC or ST type connector) fiber port.

10/100BaseT(X) Ethernet Port Connection

The 10/100BaseT(X) Ethernet ports located on CSM-200 are used to connect to Ethernet-enabled devices.

Below we show pinouts for both MDI (NIC-type) ports and MDI-X (HUB/Switch-type) ports, and also show cable wiring diagrams for straight-through and cross-over Ethernet cables.

RJ45 (8-pin, MDI) Port Pinouts RJ45 (8-pin, MDI-X) Port Pinouts

Pin Signal

1Tx+

2Tx-

3Rx+

6Rx-

18

Pin Signal

1Rx+

2Rx-

3Tx+

6Tx-

18

- 4 -