Arming

Arming Methods

There are two possible ways to arm the system:

•MANUAL Arming (Remote Control)

•AUTO Arming (Passive)

Manual Arming (Remote Controlled)

•When the main unit is set to “MANUAL,” the system is armed by using the remote control transmitter. This is the factory setting.

•The system will “beep” 3 times, and not arm, if the trunk is not closed when the “LOCK” button is pressed.

•If a door is open, the system will not arm when the “LOCK” button is pressed.

PA N I C

1

The arming mode is set to “MANUAL.”

 

2 ON

Turn the ignition key to the “OFF”(O) position.

Remove the key from the ignition switch.

3

Exit the vehicle and close all the doors and the

trunk.

OFF

 

3

Press the “LOCK” button on the remote control

transmitter.

 

You will observe the following.

 

• The remote control LED illuminates.

 

• The security system arms.

 

• The status LED flashes once per seconds.

 

• The parking lights flash once.

 

• The doors will lock*.

 

If the “LOCK” button is pressed a second time

 

(within 5 seconds of the first push) the horn will

 

beep once to confirm the doors are locked* and

 

the system is armed.

*Only on the vehicles equipped with power door locks.

10

© 2004 American Honda Motor Co., Inc. - All Rights Reserved.