System Controls
Arming Mode(AUTO
MANUAL)1 | ON |
| |
| 0 |
| OFF |
2 |
|
3 |
|
4 | seconds3 |
| |
| 4713010M |
5 | within |
| |
| 4713010M |
6 |
|
| 0 |
This section explains how to switch the arming mode from AUTO to MANUAL.
Turn the ignition key to the OFF position.
Remove the key from the ignition switch.
Open a door and close it. (The EXIT delay starts.)
NOTE: Steps 4 to 6 must be completed within 3 seconds.
Insert the ignition key, and remove the ignition key from the ignition switch. (All the way out)
Insert the ignition key, and remove the ignition key from the ignition switch. (All the way out)
Insert the ignition key. |
| The switching procedure is | The result | |
You will observe the following. |
|
|
| |
AUTO MODE | Completed | Beep twice | ||
• The system “beeps” twice. | ||||
|
|
| ||
| MANUAL MODE | Not completed | No beep | |
|
|
|
|
6 | © 2004 American Honda Motor Co., Inc. - All Rights Reserved. |