Remote Control Code Programming (Only vehicles without Power Door Locks)

13

12

12

 

Press the “LOCK” or “UNLOCK” button

 

on the remote control transmitter.

 

 

• The status LED illuminates

 

 

simultaneously for 1 second to

 

 

indicate programming mode.

 

or

• To terminate the programming mode

 

at this point, either turn the ignition

 

 

 

 

key to the “OFF” position or leave the

 

 

remote’s button untouched for over 10

 

 

seconds. To program the remote,

 

 

perform steps 2 through 12.

 

 

 

13

 

Press the “LOCK” button of each remote

 

(one at a line) to be stored in memory.

 

 

• The Status LED illuminates

 

 

simultaneously for 1 second to

 

 

confirm each entry.

 

 

• A button on each remote control

 

 

transmitter to be programmed must be

 

 

pressed. Perform the programming

 

 

step within 10 seconds for each

 

 

remote or else the programming mode

 

 

will terminate.

 

 

NOTE:

 

 

Only 3 remotes can be stored in the

 

 

system’s memory.

 

 

 

© 2004 American Honda Motor Co., Inc. - All Rights Reserved.

21