4.lnsert the filter holder into the brew head and place a mug on the drip
tray. Do not fill filter holder with coffee.
5.Plug the machine into the electrical outlet and turn the on/off switch ON.
6.Place a cup with cold water under the steam nozzle. Submerge the tip of the steam tube in the water. Slowly turn the selector control knob to the On position. After a few seconds close the steam nozzle by turning the selector control knob to the OFF position. This will clean any residue left in the nozzle from frothing milk. Next turn the brew switch to the CUP position. Vinegar will begin to flow through the filter. Let this process continue until the vinegar in the water reservoir reaches the minimum line on the water reservoir.
7.When all the vinegar has been pumped out to the minimum level of the water reservoir, turn the brew switch to the “0” OFF position and turn the on/off switch to OFF. Allow the machine to cool. Empty the remaining vinegar from the water reservoir by lifting the lid and removing the water reservoir. Pour the remaining vinegar down your
sink.
8Repeat steps.
