Mr. Coffee ECMP30/33 instruction manual Introduction, Coffee, Grind, Process

INTRODUCTION

CONGRATULATIONS! You are the owner of a MR. COFFEE® Espresso and Cappuccino Maker. Please read all of the instructions in this manual carefully before you begin to use this appliance. Proper care and maintenance will ensure the long life of this appliance and its trouble-free operation. Save these instructions and refer to them often for cleaning and care tips.

DIAGRAM OF PARTS

L

HOW TO PREPARE QUALITY ESPRESSO AND CAPPUCCINO AT HOME

THE COFFEE

The coffee should be a freshly ground, dark, espresso roast variety. You may buy whole coffee beans and grind them yourself at home using a MR. COFFEE® Burr Mill

or a MR. COFFEE® Bean Grinder. Store whole beans in an air-tight container, in a cool, dark area. You do not need to store them in a refrigerator or freezer. If you buy pre-ground coffee, plan to use the coffee within 7 to 8 days for best flavor. Store pre-ground coffee in an air-tight container and keep in a cool, dark area.

I

J

K

O

A

THE GRIND

This is a vital step in the espresso making process. The coffee must be ground fine, but not too fine. If you buy pre-ground coffee or have it ground, make sure you get an espresso grind.

MB

NC

E D

G

F

H

A.	Removable Water Reservoir	I.	Brew Button
B.	Water Level Indicator	J.	Steam Button
C.	Steam Nozzle	K. On/Off Indicator Light (Red)
D.	Frothing Attachment	L. On/Off Switch
E.	Brew Head	M. Brew Ready Indicator Light (Orange)
F.	Filter Thumb Guard	N. Steam Ready Indicator Light (Orange)
G.	Filter Holder (Filter Cup Inside)	O. Steam / Froth Control Knob
H.	Removable Drip Tray	Measuring Spoon and Tamping Tool (not shown)

•The correct grind should look gritty, like salt or sand.

•If the grind is too fine, water will not flow through the coffee, even under pressure. Coffee that is ground too fine looks like powder and feels like flour when rubbed between your fingers.

•If the grind is too coarse, water flows through the coffee too fast, preventing a full-flavored extraction.

THE PROCESS

Your New MR. COFFEE® Espresso and Cappuccino Maker was designed to make brewing fresh espresso and cappuccino at home easy. Several hints will help you make quality espresso and frothed milk drinks time after time. First, always start with fresh, cold water in the water reservoir. Be sure that all parts of your machine are cleaned from previous uses. You can preheat the cups you brew espresso into by rinsing them with hot water.

This will help keep your espresso hot after it is brewed.

The quality, roast, freshness, grind and origin of the coffee beans you use will vary the taste of your espresso. When you brew espresso, the grounds should be “tamped” in the filter cup. Tamping is the process of slightly packing the espresso coffee grounds down in the filter cup. Your MR. COFFEE® Espresso/Cappuccino Machine comes with a pre-measured coffee scoop tamping tool. NOTE: Do not overpack the grounds.

Use the bottom of the scoop to slightly press the grounds down after placing them in the filter cup (G). This will help you brew hot, rich, delicious espresso with perfect crema (the golden layer on top of fresh-brewed espresso).

4 5