Mr. Coffee EXP1 or EXP3 How To Brew Coffee, To brew this much coffee, Use this many tablespoons

SCOOP.

How To Brew Coffee

1.Depress the latch on top of the brew funnel and remove the brew funnel from your coffeemaker, see figure #l, on page 6.

place	Mr. Coffee paper	filter inside		Be sure to only use Mr.
Coffee filters. Because of		the	speed of	this	machine, other paper
filters	may cause beverage to		overflow	the	filter during brewing.

2.Place coffee into the filter according to the coffee measurement chart below.

3.Slide brew funnel back into position until it locks in place.

COFFEE MEASUREMENT CHART

For best results, use level tablespoons (tbls.) of drip grind or grind recommended for automatic drip coffeemakers.

To brew this much coffee:		Use this many tablespoons:
10	cups	9	level	tbls.
8	cups	7	level	tbls.
6	cups	6	level	tbls.
4	cups	5	level	tbls.
2	cups	3	level	tbls.

‘Use more or less coffee to suit your taste. 2 level tablesooons = 1 coffee

4.Fill the decanter with tap water to desired capacity as marked on the side of the decanter, 1 cup = 5 ounces. To brew 10 cups, fill the decanter to the bottom of the metal band.

5.Lift the dust cover and pour the water through the intake

screen. Place the empty decanter with lid on the warmer plate.

6.Depress the SELECT button twice to set the coffeemaker to “Brewer On”. The “Brewer 0n”light will glow to signal that the coffeemaker is brewing. Be sure to put the water in the coffeemaker first, before selecting “Brewer On”. To prevent damage, the machine will shut off if you have selected “Brewer On” and there is no water in the machine.

7.The brewing cycle is completed when the “Brewer On” light goes off and the “Warmer On” light is on.

Note: The adjustable temperature warmer plate will keep your coffee at the temperature you select for up to five hours. For normal usage, always keep the red dot on the temperature dial knob within the red temperature range. The setting of the temperature dial may affect the automatic shut off of The Expert. If the temperature setting is too high, The Expert may shut off prematurely. If the temperature setting is too low, The Expert may not shut off when the decanter is removed from the warmer plate. Refer to the Warmer Plate Temperature Dial and Intelligent Automatic Shut-Off instructions for further information.

7