4 . | the | decanter is not properly placed on the warmer plate, | ||
|
|
| - |
|
5 . | or, | in about | five hours, whichever comes first. |
|
| Note: The Expert may not always shut off when the | decanter | ||
| Is remo | m the warmer plate if the warmer temperature | ||
| setting | low. If this situation occurs, simply | turn the | |
temperature ‘up slightly by rotating the dial clockwise.
Automatic Pause ‘N Serve
For your convenience, our Automatic Pause ‘n Serve feature allows you up to 30 SECONDS to sneak a cup while the coffee is still brewing. But don’t delay, if the decanter is removed for more than 30 seconds, the brew funnel may overflow.
Setting The Clock And Timer
To Set the Clock...
1.Plug the power cord into a standard electrical outlet.
2 . Alternately press and hold the HOUR and MINUTE buttons until you reach the current time. AM and PM indicators are provided in the display, for your convenience.
Figure 2
To
Simply press and hold the BREW button while setting the brew time with the HOUR and MINUTE buttons. The display will indicate the AM or PM BREW time you have selected. See Figure #2.
At any time you can check the
To Automatically Brew at Pre-Set Time...
1. Follow steps #l through #5 in the section “How to Brew Coffee”. 2. Turn the coffeemaker to “Auto Start” by depressing the SELECT button until the “Auto Start” light is on. The coffeemaker is
now set to automatically brew coffee at the preset time.
3. At the desired brewing time, the “Auto Start” light will turn
off and the | “Brewer On” light will glow, indicating that the | |
coffeemaker | is brewing. | , |
| ||
4.The brewing cycle is completed when the “Brewer On” light goes off and the “Warmer On” light is glowing.
5.The Expert will NOT automatically come on again the next day. To reset “Auto Start”, repeat steps #l and #2 above.
Power loss
If power supply is
9
