15
14
4. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW™
TIMER feature. To turn the coffeemaker off, press
the SELECT button until all lights turn off.
5. Make sure the decanter is empty before starting
to brew coffee.
6. Be sure to turn your coffeemaker off when
no longer using it.

The Fresh Brew™Timer Feature

The FRESH BREW™TIMER feature lets you know how
long your coffee has been waiting for you. At the
start of the brew cycle, the FRESH BREW™TIMER
feature will automatically be activated and the clock
display will change to show the time since brewing
began. Incremental segments of the FRESH BREW™
TIMER feature will start to darken as an indication of
how long the coffee has been waiting for you.
Press the FRESH BREW™TIMER button once (Figure 8)
to go back to the clock function (while on the
clock mode, the FRESH BREW™ TIMER feature will
keep counting). The display will automatically
change back to the clock after 2 hours or when the
unit is turned off.
NOTE:The BREW NOW green light must be on
for the FRESH BREW™ TIMER feature to operate.
The time and delay brew time cannot be set
when the fresh brew time is displayed.

On/Off Audible Ready Signal

The coffeemaker will beep three times at the end of
the brew or clean cycle. You may choose not to be
alerted by turning the audible ready signal off (Figure 9).
BREWING COFFEE LATER
1.You must first set the time for when you would
like the coffeemaker to begin brewing your
coffee as described in Setting the Clock and
the Delay Brew Timersection.
2. Prepare your coffeemaker as described in
Adding Water and Ground Coffeesection.
3. To activate DELAY BREW and program your
coffeemaker to brew coffee at a later time, press
the SELECT button twice. The yellow DELAY
BREW light will turn on (Figure 10). The
coffeemaker is now set to automatically brew
coffee at the pre-set later time. At this time the
brew strength light will turn on. You can select
the strength that you desire by pressing the BREW
STRENGTH button.
4. At the pre-set time, the green BREW NOW light
will turn on and the DELAYBREW yellow light will
turn off, indicating the brewing has started in the
selected brew strength. The FRESH BREW™TIMER
feature will start.
5. The coffeemaker warmer plate will keep your coffee
hot for 2 hours and then automatically turn off. Thermal
models will turn off at the end of the brew cycle.
As a safety feature, your coffeemaker will NOT
start again automatically the next day. If you
want your coffee to brew at the same time the
following day,simply add a new filter,coffee
and water and set DELAYBREW,by repeating
Steps 2 and 3 above.

Tocancel DELAYBREW:

Press the SELECT button until all lights turn off
(Figure 10).
FIGURE 8
FIGURE 10
FIGURE 9
15-0906-796_IS_InstrMan_v4.qx 11/27/06 12:37 PM Page 14