2)Place a paper filter into the removable filter basket and close the brew basket.
3)Place the empty decanter on the warming plate.
Make sure to accurately place the decanter on the warming plate
to avoid the possibility of overflow.
4)Start the brew cycle:
For Models NL4 and NL5:
Push the ON/OFF switch to ON to begin the brew cycle.
For Models NLX4 and NLX5:
Slide the switch to ON. Then, press the brew button to begin the brew cycle.
5)When 3 cups of vinegar have flowed into the decanter, turn the coffeemaker Off and let the vinegar stand for 30 minutes.
6)After the
7) Discard both the vinegar and paper filter.
8) Fill the decanter with tap water and pour it into the water reservoir.
9) Place the decanter on the warming plate and begin the brew cycle.
10) When the brew cycle is complete, discard the water in the decanter and turn the coffeemaker Off. If necessary, repeat steps 8 through 10 to flush all traces of vinegar from the coffeemaker.
Cleaning the Decanter
Hard water can leave a whitish stain on the decanter.
Coffee and tea may then turn this stain brown.
To remove decanter stains:
1) Fill the decanter with a solution of equal parts tap water and vinegar and let the solution stand in the decanter for approximately 20 minutes.
2) Discard the solution and wash and rinse the decanter.
Do not use harsh abrasive cleansers that may scratch the decanter; scratches may cause the decanter to break.
14 | 15 |
