Mr. Coffee SPR-101006 Brewing Coffee Later, Described in Setting the Clock and the Delay Brew

LM SERIES IB-FINAL:Layout 2 10/13/2009 12:05 AM Page 14

4. Prior to making a second pot of coffee, turn the		BREWING COFFEE LATER
coffeemaker off. This will reset the FRESH BREW™		1. You must first set the time for when you would like
TIMER feature. To turn the coffeemaker off, press
the BREW NOW/OFF button all lights will turn off.		the coffeemaker to begin brewing your coffee as
		described in Setting the Clock and the Delay Brew
5. Make sure the decanter is empty before starting to		Timer section.
brew coffee.		2. Prepare your coffeemaker as described in Adding
6. Be sure to turn your coffeemaker off when		Water and Ground Coffee section.
no longer using it.		3. To activate DELAY BREW and program your
The Fresh Brew™ Timer Feature		coffeemaker to brew coffee at a later time, press the
		DELAY BREW button (Figure 9). The blue DELAY
The FRESH BREW™ TIMER feature lets you know how		BREW light will turn on. The coffeemaker is now set
		to automatically brew coffee at the pre-set later time.
long your coffee has been waiting for you. At the start
		At this time the brew strength light will turn on. You
of the brew cycle, the FRESH BREW™ TIMER feature
		can select the strength that you desire by pressing the
will automatically be activated.
		BREW STRENGTH button. (Amber for STRONG,
Press the FRESH BREW™ TIMER button once (Figure		white for REGULAR)
8) and the clock time will change to show the amount		4. At the pre-set time, the blue BREW NOW light will
of time that has passed since brewing completed. Push
		turn on and the DELAY BREW blue light will turn
again to display current time.
		off, indicating the brewing has started in the selected
NOTE: The BREW NOW blue light must be on		brew strength. The FRESH BREW™ TIMER feature	FIGURE 9
		will start.
for the FRESH BREW™ TIMER feature to operate.
The time and delay brew time cannot be set		5. The coffeemaker warming plate will keep your coffee
when the fresh brew time is displayed.	FIGURE 8
		hot for 2 hours and then automatically turn off.
		Thermal models will turn off at the end of the brew
		cycle.
		As a safety feature, your coffeemaker will NOT start
		again automatically the next day. If you
		want your coffee to brew at the same time the following
		day, simply add a new filter, coffee
		and water and set DELAY BREW, by repeating
		Steps 2 and 3 above.
		To cancel DELAY BREW:Press the DELAY BREW
		button until all lights turn off (Figure 9).

14 15