Operation of MR Handsfree Genius

HOW TO USE THE UNIVERSAL HOLDER?

•Release the cramps of the Genius main unit by pushing the button between the cramps.

•Put your telephone between the cramps.

•Close the cramps in a way that they hold the telephone and it therefore cannot fall.

•Take the telephone out of the holder without releasing the cramps by sliding the telephone to the top side.

•To insert the telephone, you slide it from the top side between the cramps of the Genius.

•You only have to adjust the cramps to the size of your telephone once.

CONNECTING THE PHONE TO THE CONNECTOR CABLE

•Activate the power supply to the Genius by starting the engine and connecting the cigarette plug (if applicable).

•Connect the Genius connector to the mobile phone after the power supply is activated.

•Charging function is activated now (if applicable).

Important:

During installation always make sure that the power cord is inserted into the cigarette lighter and power provided before connecting your mobile phone. The connection of your mobile phone should ALWAYS be the LAST step of complete mr Handsfree installation.

HOW TO USE THE ANTI-THEFT SYSTEM

The Genius main unit can be released from the holder. When the two buttons are pressed together, the main unit can be taken of the Genius main unit holder. This way you can remove all important electronics and avoid being robbed.

IMPORTANT!

•Always read the ‘TROUBLE-SHOOTING’ chapter carefully.

•The mr Handsfree ‘Special Brand’ mobile phone connector can be obtained by mail or directly from your local supplier.

•Due to the ‘Special Brand’ mobile phone connector which can be ordered separately for each mobile phone model (Nokia, Ericsson etc.), your mr Handsfree Genius is suitable for any type of mobile phone.