MS-91A2 Server Board

Power Management

Restore on AC Power Loss

This setting specifies whether your system will reboot after a power failure or interrupt occurs. Available settings are:

[Power Off]

Leaves the computer in the power off state.

[Power On]

Leaves the computer in the power on state.

[Last State]

Restores the system to the previous status before power

 

failure or interrupt occurred.

Resume On PME#

When set to [Enabled], this setting allows your system to be awakened from the power saving modes through any PME (Power Management Event).

Resume On RTC Alarm

When [Enabled], your can set the date and time at which the RTC (real-time clock) alarm awakens the system from suspend mode.

3-10

Page 50
Image 50
MSI 3200 Network manual Resume On PME#, Resume On RTC Alarm