MSI 3200 Network manual MS-91A2 Server Board Console Redirection Remote Access, Terminal Type

MS-91A2 Server Board

Console Redirection

Remote Access

The setting enables/disables the remote access function. When set to [Enabled], users may configure the following settings for remote access type and parameters.

Serial Port Number, Base Address, IRQ, Serial Port Mode Use these settings to configure ports for remote access.

Flow Control

Flow control is the process of managing the rate of data transmission between two nodes. It’s the process of adjusting the flow of data from one device to another to ensure that the receiving device can handle all of the incoming data. This is particularly important where the sending device is capable of sending data much faster than the receiving device can receive it.

Redirection After BIOS POST

This setting determines whether or not to keep terminals’ console redirection running after the BIOS POST has booted.

Terminal Type

To operate the system’s console redirection, you need a terminal supporting ANSI terminal protocol and a RS-232 null modem cable connected between the host system and terminal(s). This setting specifies the type of terminal device for console redirection.

VT-UTF8 Combo Key Support

This setting enables/disables the VT-UTF8 combination key support for ANSI/ VT100 terminals.

3-12