MSI G41M-P26 manual Screw Holes

Screw Holes

When you install the mainboard, you have to place the mainboard into the chas- sis in the correct direction. The locations of screws holes on the mainboard are shown as below.

The side has to toward the rear, the position for the I/O shield of the chassis.

BATT +

Screw holes

Refer above picture to install standoffs in the appropriate locations on chassis and then screw through the mainboard screw holes into the standoffs.

Important

*To prevent damage to the mainboard, any contact between the mainboard circuit and chassis or unnecessary standoffs mounted on the chassis is prohibited.

*Please make sure there is no metal components placed on the mainboard or within the chassis that may cause short circuit of the mainboard.

12