▍
9.Align the holes on the mainboard with the heatsink. Push down the cooler until its four clips get wedged into the holes of the mainboard.
11.Turn over the mainboard to confirm that the
10.Press the four hooks down to fasten the cooler.
12.Finally, attach the CPU Fan cable to the CPU fan connector on the main- board.
Mainboard
Hook
Important
•Read the CPU status in BIOS.
•Whenever CPU is not installed, always protect your CPU socket pin with the plastic cap covered (shown in Figure 1) to avoid damaging.
•Mainboard photos shown in this section are for demonstration of the CPU/ cooler in- stallation only. The appearance of your mainboard may vary depending on the model you purchase.
•Please refer to the documentation in the CPU fan package for more details about the CPU fan installation.
