MSI H67MS-E33 (B3) manual

BIOS Setup

▶GT OverClocking

This item allows you to enable/ disable the overclocking of integrated graphics.

▶GT Ratio

This setting controls the ratio of integrated graphics frequency to enable the integrated graphics to run at different frequency combinations.

▶Adjusted GT Frequency

It shows the adjusted integrated graphics frequency. Read-only.

▶VDroop Control

This item is used to select the VDroop control mode.

▶CPU Vcore/ DRAM Voltage/ GPU Voltage/ PCH 1.05

These items are used to adjust the voltage of CPU, Memory, GPU and chipset.

▶Current CPU Vcore/ Current DRAM Voltage/ Current GPU Voltage These items show current CPU Vcore/ DRAM/ GPU voltage. Read-only.

▶Overclocking Profile

Press <Enter> to enter the sub-menu.

▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Press <Enter> to enter the sub-menu. In the sub-menu, these items are used to save the current settings, and you can to load the settings from the stored profile.

▶OC Retry Count

When overclocking has failed, setting this item as [1, 3] will allow system to reboot 1/ 3 times with the same overclocked configuration. If overclocking has failed every time, the system will restore the defaults.

▶CPU Specifications

Press <Enter> to enter the sub-menu. The submenu shows the information of installed CPU.

▶CPU Technology Support

Press <Enter> to enter the sub-menu. The sub-menu shows the installed CPU tech- nologies. Read only.

3-10