▶IGD 
-Monitor
When “Enabled”, the integrated graphics and extra graphics card can be configured as
▶USB Configuration
Press <Enter> to enter the
▶USB Devices:
This item shows the type of installed USB device. ▶USB Controller
This item allows you to enable/ disable the USB controller.
▶Legacy USB Support
Select [Enabled] if you need to use a
▶Super IO Configuration
Press <Enter> to enter the
▶Serial
Port 0 Configuration
Press <Enter> to enter the
▶Serial
Port
This item allows you to enable/ disable the serial port.
▶Change Settings
Select an address and corresponding interrupt for the serial port.
▶Parallel
Port Configuration
Press <Enter> to enter the
▶Parallel
Port
This item allows you to enable/ disable the parallel port.
▶Change Settings
Select an address and corresponding interrupt for the serial port.
▶Device Mode
Select a device mode for parallel port.
