Chapter 3
[Next Boot] | CPU will run the adjusted CPU base clock after reboot. |
[Immediate] | CPU runs the adjusted CPU base clock immediately. |
▶CPU Ratio Mode [Auto]
Selects the CPU Ratio operating mode.
[Auto] | This setting will be configured automatically by BIOS. |
[Fixed Mode] | Fixes the CPU ratio. |
[Dynamic Mode] | CPU ratio will be changed dynamically according to the CPU |
| loading. |
▶Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be changed if the processor supports this function.
▶Adjusted CPU Frequency
Shows the adjusted CPU frequency.
▶EIST
[Enabled]
Enables or disables the Enhanced Intel® SpeedStep Technology.
▶Intel
Turbo Boost [Enabled]
Enables or disables the Intel® Turbo Boost. This item appears when the installed CPU supports this function.
[Enabled] | Enables this function to boost CPU performance automatically above |
| rated specifications when system request the highest performance |
| state. |
[Disabled] | Disables this function. |
▶Enhanced
Turbo [Auto]
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU performance.
[Auto] | This setting will be configured automatically by BIOS. |
[Enabled] | All CPU cores would be increased to maximum turbo ratio. |
[Disabled] | Disables this function. |
▶OC Genie Switch [Gear1]
Selects a kind of overclocking profiles for OC Genie Function. This item appears when "OC Genie Function Control" sets to [By BIOS Options].
[Gear1] | Enables Gear1 overclocking profile for overclocking. |
[Gear2] | Enables Gear2 overclocking profile for extreme overclocking. |
Important
•We recommend that you do not to make any modification in OC menu and do not to load defaults after enabling the OC Genie function.
•Updating BIOS or clearing CMOS is not allowed in OC Genie mode, and it may cause OC Genie function fail or other effect.
▶Adjust Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.
BIOS Setup |
