VIA VT1708 Audio
Mixer Configuration Panel
On the Mixer Configuration Panel, there are four mixer devices that can be selected: playback, recording, headphone and microphone.
Below shows the Playback Mixer. Each of the Playback items has a volume, balance and mute control. You can also select the default playback device from a
When select desired box to enable “Analog To Line Out”, you can hear the analog input source (such as Microphone, Line In) from the speaker. In this condition Jack detection function will be disabled.
| Balance |
Playback Control | Default Playback Device |
Mute Volume
Analog To Line Out
On the Recording Mixer, all possible input devices are shown. Below shows the Recording Mixer. Each of the Recording items has a volume, balance and item select. Please note that there can only be one source at any given time. On the bottom side of this page, there are Mic boost control check box. You could enlarge the recording sound of MIC by checking on this feature. There is also a peak meter to show the volume of the audio input.
| Balance |
Recording Control | Default Playback Device |
Enable MIC BoostVolume
Select Recording Device
