MSI B-14, MS-7255 Mainboard, Auto Show Dialog Suggest Jack Function Indicates unavailability

MS-7255 Mainboard

The jack detection function can be enabled by checking the "Auto Show Dialog" checkbox. W hen a new device is plugged-in, a new panel will be displayed. The below figure shows an example of a jack being plugged into the green jack. When the jack insertion is detected, Adeck will be displayed. You will see a red arrow indicating the jack insertion event. Even the “Auto Show Dialog” is disabled, you still can press the “Manual Detect” to detect status of jacks.

When you clicks on the jack indicated by the arrow, an extension of the panel will be displayed. There you can assign the jack to any available function. Functions that are not available will not have a checkbox next to it.

Press to detect status of jacks

Indicates a jack has been inserted

Auto Show Dialog

Suggest Jack Function Indicates unavailability

Set Jack Function

B-14