MSI NF725GM-P43 manual JUSBPW1

USB power Jumper: JUSB_PW1, JUSB_PW2

These jumpers are used to select USB ports powered by VCC5 or 5VSB. Set to 5VSB if you want them provide power in standby mode.

JUSB_PW1

(for rear USB 2.0 ports)

JUSB_PW2

(for on-board USB connec- tors)

1 1 1

	Keep USB	Keep USB
	power to VCC5	power to 5VSB
	(default)
1	1	1
	Keep USB	Keep USB
	power to VCC5	power to 5VSB
	(default)

Important

If you set the jumper to 5VSB, the power supply must be able to provide at least 2A currents.

LAN, Front Audio EuP Jumper: JLAN_PW1, JAUD_PW1

EuP(Energy-using Products) is a standard for reducing power consumption in standby mode. These jumpers are used to enable/ disable the EuP function of the LAN jack and the front audio connector.

JLAN_PW1

(for LAN jack)

JAUD_PW1

(for JAUD1 connector)

1	1	1
	Enable EuP	Disable EuP
	(default)
1	1	1
	Enable EuP	Disable EuP
	(default)

Important

If you set the jumper to EuP, the Wake-on-LAN function will be disabled under S3, S4, S5 state.

20