BIOS Setup

•Remember to disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a temporary boost in clock speed which may just cause your over- clocked processor to lock up.

▶VDroop Control

This item is used to select the VDroop control mode.

▶CPU Vcore/ DRAM Voltage/ PCH 1.05

These items are used to adjust the voltage of CPU, Memory and chipset. ▶Current CPU Voltage/ Current DRAM Voltage

These items show current CPU/ DRAM voltage. Read-only. ▶Overclocking Profile

Press <Enter> to enter the sub-menu.

▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Press <Enter> to enter the sub-menu. In the sub-menu, these items are used to save the current settings, and you can to load the settings from the stored profile.

▶OC Retry Count

When overclocking has failed, setting this item as [1, 3] will allow system to reboot 1/ 3 times with the same overclocked configuration. If overclocking has failed every time, the system will restore the defaults.

▶CPU Specifications

Press <Enter> to enter the sub-menu. The submenu shows the information of installed CPU.

▶CPU Technology Support

Press <Enter> to enter the sub-menu. The sub-menu shows the installed CPU tech- nologies. Read only.

▶MEMORY-Z

Press <Enter> to enter the sub-menu.

3-10