Intel
RAID
6� Go to the Create Volume field and press <Enter>, the following screen appears for you to confirm if you are sure to create the RAID volume. Press <Y> to continue.
[ CREATE VOLUME MENU ]
Name : | Volume0 |
RAID Level : | RAID1(Mirror) |
Disks : | Select Disks |
Strip Size : | N / A |
Capacity : | XXX.X GB |
Sync : | N / A |
Create Volume
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want[ toHELPcreate] this volume? (Y / N) :
Press ENTER to create the specified volume.
[ ↑↓] - Change | [TAB] - Next | [ESC] - Previous Menu | [ENTER] - Select |
7� Then the following screen appears to indicate that the creation is finished.
|
| [ | [ MAIN MENU ] | ] |
|
1. | Create RAID Volume | 4. |
| Recovery Volume Options | |
2. | Delete RAID Volume | 5. |
| Acceleration Options | |
3. | Reset Disks to | 6. |
| Exit | |
|
| [ DISK / VOLUME INFORMATION ] |
|
| ||
RAID Volumes : |
|
|
|
|
| |
ID | Name | Level | Strip | Size | Status | Bootable |
0 | Volume0 | RAID1(Mirror) | N / A | XXX.XGB | Normal | Yes |
Physical Devices : |
|
|
|
|
| |
Port | Device Model | Serial # |
| Size | Type/Status (Vol ID) | |
1 |
| XXXXXXXXXXXXXX |
| XXX.XGB | Member Disk(0) | |
2 | XXXXXXXXXXXXXX |
| XXX.XGB | Member Disk(0) | ||
| [ ↑↓] - Select | [ESC] - Exit |
| [ENTER] - Select Menu | ||
