MSI Z87-XPOWER manual Save & Exit, Chapter

Models: Z87-XPOWER

1 120
Download 120 pages 6.02 Kb
Page 85
Image 85
Save & Exit

Important

When selecting the Administrator / User Password items, a password box will appear on the screen. Type the password then press <Enter>. The password typed now will replace any previous set password from CMOS memory. You will be prompted to confirm the password. You may also press <Esc> to abort the selection.

To clear a set password, press <Enter> when you are prompted to enter a new password. A message will confirm the password is being disabled. Once the password is disabled, you can enter the setup and OS without authorization.

▶U-Key [Disabled]Manual backgroundManual backgroundManual backgroundManual background

Enables or disables U-Key as user's password to access the system.

▶Make U-Key at

Makes a key at the USB flash drive to prevent other people from accessing the system. Only the user who has the key with the flash drive can access the system.

▶Trusted Computing

Sets TPM (Trusted Platform Module) function.

▶TPM SUPPORT [Disabled]Manual backgroundManual backgroundManual backgroundManual background

Enables or disables the TPM function to build the endorsement key for accessing the system.

Chassis Intrusion Configuration Press <Enter> to enter the sub-menu.

▶Chassis Intrusion [Disabled]Manual backgroundManual backgroundManual backgroundManual background

This function will be available if the chassis equips a chassis intrusion switch. Once the chassis is opened, the system will record and issue a warning message. To clear the warning message, set the item to [Reset], then it will return to [Enabled] later. [Options: Disabled, Enabled, Reset]

Save & Exit

▶Discard Changes and Exit

Exit BIOS setup without saving any change. This it is used to abandon all changes and exit BIOS setup.

▶Save Changes and Reboot

This item is used to save all changes and reboot the system.

▶Save Changes

This item is used to save current changes. ▶Discard Changes

This item is used to discard current all changes and restore to the previous values.

▶Restore Defaults

This item is used to restore/ load all default values by the BIOS vendor.

▶Boot Override

The installed boot-able devices will appear on this menu, you can select one of them be a boot device to start booting.

Chapter 3

3-15

BIOS Setup

Page 85
Image 85
MSI Z87-XPOWER manual Save & Exit, Chapter